Ma Com P7100 Manual
Jan 15, 2009 - The P7100IP series portable radios are rugged, high-quality, high-performance two. Are M/A COM's most sophisticated, high specification portable radios. • Loading Tracking Data and Feature Encryption Data. Ma Com P7100 Manual ebooks and guide Sony Spp Ss965 Telephones Owners Manual. This is Sony Spp Ss965 Telephones Owners Manual the best ebook that you can get right now online. Six Station Lithium chemistry charger for Harris/Macom P7100 Radios. Charger includes A/C power supply and comprehensive user manual.
. Operator’s Manual MM102708V1 Rev. F, Aug/06 P5100 Series Portable Radios. This manual is published by M/A-COM, Inc. Without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM, Inc., at any time and without notice.
MM102708V1, Rev. This device is a RF transceiver intended for land mobile radio applications. The device may have use restrictions, which require that the national authority be contacted for any system licensing requirements, frequency use, allowable power level, etc. MM102708V1, Rev. F TABLE OF CONTENTS Page SAFETY TRAINING INFORMATION.8 RF EXPOSURE GUIDELINES.8 ELECTROMAGNETIC INTERFERENCE/ COMPATIBILITY.9 SAFETY SYMBOL CONVENTIONS.10 OPERATING TIPS.11 EFFICIENT RADIO OPERATION. 11 3.1.1 Antenna Care and Replacement.11 3.1.2 Electronic Devices. MM102708V1, Rev.
F 9.4.2 Select Model.29 MODIFY SCAN LIST (SCAN MODEL ONLY).29 BACKLIGHT ON/OFF (SCAN MODEL ONLY).30 CONTRAST ADJUST (SCAN MODEL ONLY).30 DECLARING AN EMERGENCY. 30 LOCKING/UNLOCKING KEYPAD (SCAN MODEL ONLY).30 9.10 HIGH/LOW POWER ADJUSTMENT.31 9.10.1 Using the Menu Button (Scan Model Only).
MM102708V1, Rev. F 11.7.6 Data Lockout Mode. 47 11.8 PAGE (P25 TRUNKING ONLY).47 12 PROJECT 25 (P25) CONVENTIONAL OPERATION.48 12.1 GROUP CALLS IN P25 MODE.48 12.1.1 Transmitting a Group Call. 48 12.1.2 Receiving a Group Call.48 12.2 INDIVIDUAL CALLS IN P25 MODE. MM102708V1, Rev. F Figure 9-3: Information Display.35 Figure 11-1: Calls Received Lists.42 Figure 11-2: WHC Individual Call Display.42 Figure 13-1: Radio Microphone.51.
FCC RF exposure limits to be exceeded. A proper antenna is the antenna supplied with this radio by M/A-COM or an antenna specifically authorized by M/A-COM for use with this radio. (Refer to Table 7-1: Options and Accessories.). ELECTROMAGNETIC INTERFERENCE/ COMPATIBILITY During transmissions, this M/A-COM radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as. Failure to comply with these precautions or with specific warnings elsewhere violates safety standards of design, manufacture, and intended use of the product. M/A-COM, Inc.
Assumes no liability for the customer's failure to comply with these standards. The WARNING symbol calls attention to a procedure, practice, or the like, which, if not correctly performed or adhered to, could result in personal injury. MM102708V1, Rev.
F OPERATING TIPS Antenna location and condition are important when operating a portable radio. Operating the radio in low lying areas or terrain, under power lines or bridges, inside of a vehicle or in a metal framed building can severely reduce the range of the unit. MM102708V1, Rev. F 3.1.2 Electronic Devices RF energy from portable radios may affect some electronic equipment. Most modern electronic equipment in cars, hospitals, homes, etc. Are shielded from RF energy.
However, in areas in which you are instructed to turn off two-way radio equipment, always observe the rules. MM102708V1, Rev. F MARITIME CHANNELS As part of FCC Equipment Authorization Part 80 licensing, a maritime frequency usage plan has been included in this manual for reference. The antenna connector (between antenna and radio) is a nominal 50Ω impedance.
® five® iTECH battery conditioners, purchased directly from M/A-COM. These units condition a battery pack by automatically charging and discharging (cycling) the battery. Failure to properly condition NiMH battery packs before initial use will result in shortened performance by the battery. MM102708V1, Rev. Lift the battery pack from the bottom. Remove the battery pack from the radio. Figure 5-1: Removing the Battery Pack 5.4.2 Attaching the Battery Pack Make sure the power to the radio is turned OFF.
MM102708V1, Rev. F RECHARGEABLE BATTERY PACK DISPOSAL – The product you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. MM102708V1, Rev. F INTRODUCTION This manual describes how to use the P5100 series portable radio.
The P5100 series portable radio is available without a front mounted keypad (P5130 – Select model) and with a 6-button front mounted keypad (P5150 – Scan model radio). The P5100 series radios are synthesized, microprocessor-based, high performance portable FM radios providing reliable two-way communications in the Enhanced Digital ®. MM102708V1, Rev.
F OPTIONS AND ACCESSORIES Table 7-1 lists the Options and Accessories tested for use with the P5100 series portable radios. Items for use with a specific band split are noted. Refer to the maintenance manual or to M/A-COM’s Products and Services Catalog for a complete list of options and accessories, which includes those items that do not adversely affect the RF energy exposure.
MM102708V1, Rev. F DESCRIPTION PART NUMBER Miscellaneous Accessories (Continued) Speaker Mic Antenna Version Plus KRY 101 1617/184 Speaker Mic, Charger Compatible KRY 101 1617/185 Speaker Mic, Ant. Version, Charger Comp. KRY 101 1617/186 Speaker Mic, Immersible KRY 101 1617/283 Speaker Mic, Ant. MM102708V1, Rev. F USER INTERFACE Figure 8-1: Top View Figure 8-2: Side View. MM102708V1, Rev.
F Figure 8-3: Scan Model Front Panel Controls CONTROLS The P5100 portable radios feature two rotary control knobs and an emergency button mounted on the top of the radio. The Push-To-Talk (PTT), option, and monitor buttons are mounted on the side. In addition, the P5150 Scan model portable radio has a front mounted keypad with six buttons (see Figure 8-3). MM102708V1, Rev.
F SYSTEM/GROUP/ The System/Group/Channel knob is used to select systems or group/channels CHANNELKNOB (depending on programming). This is a 16-position rotary knob. Note: A mechanical stop, which can limit the positions accessed, is shipped with the radio but must be installed. To install the mechanical stop, remove the channel knob, loosen the set screw on the channel knob metal base (using a 1.27mm hex wrench), and remove the channel knob metal base.
MM102708V1, Rev. F Table 8-1: Scan Model Radio Key Functions FUNCTION Primary Function: Allows the user to select system, groups, or channels, depending on personality programming. The buttons act as STEP UP or STEP DOWN. Pressing one of these buttons displays the next or previous stored system, group, or channel. MM102708V1, Rev. F 8.2.1 Radio Status Icons Status Icons indicate the various operating characteristics of the radio.
The icons show operating modes and conditions and appear on the third line of the display (see Table 8-2). Table 8-2: Display Icons Steady –. MM102708V1, Rev.
F Figure 8-7: LED 8.2.2 LED The LED (Figure 8-7) changes color to indicate radio status and is visible from both the front and top of the radio. The two colors of the LED and the status they represent are listed in Table 8-3.
Ma.com P7100 Radio
Table 8-3: LED Color and Status COLOR STATUS. MM102708V1, Rev. F 8.2.3 Status Messages During radio operation, various radio Status Messages can be displayed. The messages are described below. MESSAGE NAME DESCRIPTION QUEUED Call Queued Trunked mode only.
Indicates the system has placed the call in a request queue. SYS BUSY System Busy Trunked mode only. MM102708V1, Rev. F 8.2.4 Error Messages If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs servicing. DIG V ERR=XXXX (Power Up only) xxxx DSP ERR DIG V ERR Where: is the error code and is the message. MM102708V1, Rev. F BASIC OPERATION This section covers those functions and features common to all P5100 radio models.
Subsequent sections will cover functions and features common to specific operating modes (conventional, trunked, and P25). TURNING ON THE RADIO 1. Power ON the radio by rotating the POWER ON-OFF/VOLUME knob clockwise. A short alert signal (if enabled through programming) indicates the radio is ready to use. MM102708V1, Rev. F GROUP SELECTION The control used to select groups is also programmable. Group selection may be assigned to the System/Group/Channel knob on the top of the radio, to the buttons (Scan model only), or to the Option 1 button on the side of the radio.
The following subsections offer steps for the various possible control configurations. MM102708V1, Rev. Press once to add as a normal group or channel. Press twice to add as a Priority 2 group. Press three times to add as a Priority 1 group. Press to re-start scanning.
BACKLIGHT ON/OFF (SCAN MODEL ONLY) . MM102708V1, Rev.
F 9.10 HIGH/LOW POWER ADJUSTMENT Transmit power adjustment is possible if enabled through programming. Within conventional systems, transmit power is adjustable on a per channel basis.
Within P25 Trunked and EDACS systems, transmit power is adjustable on a per system basis. There are two ways to toggle between high and low power: 9.10.1 Using the Menu Button (Scan Model Only) . MM102708V1, Rev.
F 9.11.1 Menu Item Selection An example of the menu item selection process and menu item parameter change is detailed below for the backlight menu item. PRESS The menu mode is entered. PRESS until the display shows: . MM102708V1, Rev. F Table 9-1: Menu Item Information FEATURE DISPLAY PARAMETER COMMENT SETTING Keypad Lock Menu Item: Locked Locks the keypad. To unlock; press and KEY LOCK Unlocked release “M” then within Once Selected: 1 second press the LOCKED option button (NOTE: this sequence is also a short cut to locking the keypad.).
MM102708V1, Rev. F FEATURE DISPLAY PARAMETER COMMENT SETTING Select PHN CALL Trunked Only. Telephone Numbers From Phone List Data NO DATA ON/OFF Trunked Only. Toggles Operation Data Operation ON/OFF. Select IND CALL Trunked Only. Individual Call from IC List Select GRP SEL Trunked Only. DSP RAM DSP Software Version FLSH - VER FLASH Software r - released, 01A - revision state M/A-COM Copyright (C) – 2003-2004 Figure 9-3: Information Display 9.12 DIGITAL VOICE OPERATION Digital voice programmed systems have two (2) different voice modes: clear (analog) and digital.
The voice modes are programmed on a per-group basis within each trunked system and on a per-channel basis within each conventional system. MM102708V1, Rev. F The overdial DTMF tones are not available while in the Digital Mode. 9.12.2.1 Scanned Group Calls Receiving a Scanned Group Call is the same as receiving a selected group call.
During the scan hang time, if the radio was programmed for autoselect, it will transmit back in the same mode it received the call. MM102708V1, Rev. F 10 CONVENTIONAL OPERATION In addition to the features covered in Section 9 - BASIC OPERATION, the following functions are applicable to conventional mode operation. The radio functions in the conventional mode when using conventional (non-trunked) communications channels. 10.1 RECEIVING A CALL 1. MM102708V1, Rev.
F 11 TRUNKED OPERATION In addition to the features covered in Section 9 - BASIC OPERATION, the following functions are applicable to P25 Trunked and EDACS operation. The radio functions in the P25 Trunked or EDACS mode when using trunked communications systems. 11.1 SCANNING TRUNKED GROUPS A P5130 Select model radio can be programmed (using ProGrammer) to utilize the scan function by assigning that function to one of the option buttons on the side of the radio. MM102708V1, Rev.
Press a third time to set the group to Priority 1. Will display on line three. The priority level section sequence only advances the group to the next high priority level and stops at priority level 1. To select a lower priority level, the group must be deleted from the scan list and then added back to the scan list. MM102708V1, Rev. F 11.2.1 Wide Area System Scanning The P5100 series radios can be programmed for Wide Area System Scan operation for roaming across mobile systems.
Macom P7100 Manual
Upon the loss of the currently selected system's control channel, radios can be programmed to automatically scan the control channels of other systems. If a new control channel is found, the radio will switch to the new system and sound an alert tone. MM102708V1, Rev.
F 11.2.5 Pre-Programmed Keypad Key (Scan Model Only) SYSC ON SYSC OFF Press the key pre-programmed to toggle System Scan and the display message is displayed for two seconds to show the new state. 11.3 EMERGENCY OPERATION The radio's ability to declare an emergency, clear an emergency, remain locked on an emergency system and group, and the emergency audio and display freeze can each be enabled or disabled through programming. MM102708V1, Rev.
F If a response is made to the call by pressing the PTT prior to the programmed call-back time-out, the call will automatically be directed to the originating unit. If a response is not made before the call-back time-.WHC. out, the radio will return to normal receive display, and will appear on the first line of the LCD. MM102708V1, Rev.
Ma.com P7100 Mic
Press the PTT button; when the radio is clear to transmit turns ON, turns OFF and the channel.INDV. access tone sounds. Line one shows the called individual's name or LID. The message displayed on line two. 11.5 TELEPHONE INTERCONNECT CALLS 11.5.1 Receiving a Telephone Interconnect Call When the radio receives a telephone interconnect call (a call directed only to the user's radio), it un-mutes.
MM102708V1, Rev. F 11.6 STATUS/MESSAGE OPERATION (SCAN MODEL ONLY) Status operation permits the transmission of a pre-programmed status condition to the P25 Trunked or EDACS site. Message operation permits the transmission of a pre-programmed message text to a P25 Trunked or EDACS site.
11.6.1 Status Operation . 11.7 PORTABLE DATA The P5100 series portable radios, when operating in the P25 Trunked or EDACS configuration, permit either voice or data calls to be transmitted or received. The radio can handle only one type of call at a time. MM102708V1, Rev. F 11.7.2 DATA OFF Operation The radio can be placed in the data disabled state by any of the following methods. When the data state is DATA OFF disabled, appears in the top line of the display.
Declaring an emergency (not to be used unless an actual emergency condition exists). MM102708V1, Rev. F 11.7.5 Scan Lockout Mode Following the transmission or reception of a data call, if scan is enabled, scanning will stop temporarily (two independent pre-programmed times; after a receive data call and after a transmit data call). During this time the scan indicator will flash to indicate that scan is enabled but temporarily suspended. MM102708V1, Rev.
F 12 PROJECT 25 (P25) CONVENTIONAL OPERATION 12.1 GROUP CALLS IN P25 MODE 12.1.1 Transmitting a Group Call 1. Select the desired P25 system. (P25 icon will appear in display.) 2. Select the Talk Group/Conventional Channel. (Selected simultaneously using either the system/group/channel knob or the group key.) 3.
MM102708V1, Rev. F 12.2.2 Receiving an Individual Call The radio will unmute according to the squelch mode defined in the radio personality (monitor, normal, selective). Select the desired P25 system and Talk Group/Channel or turn scan on and make sure the desired channel is in the scan list. MM102708V1, Rev. F 12.3.2 Receiving an Emergency Group Call 1.
Select the desired P25 System and Talk Group/Channel. When the radio detects an incoming Emergency Group Call, the radio will sound an alert tone and “RXEMER” will appear in the display. MM102708V1, Rev. F 13 OPERATION FOLLOWING WATER CONTACT If the microphone air path or speaker grill of the P5100 model radios become clogged with water, follow instructions under “Radio Microphone” and “Radio Speaker” sections to assure the highest quality transmitted and received messages. 13.1 RADIO MICROPHONE In the event the P5100 microphone air path becomes clogged with water, blow two quick successive breaths of air directly into the radio microphone air hole.
MM102708V1, Rev. F 14 BATTERY WARRANTY M/A-COM, Inc.
(hereinafter 'Seller') warrants to the original purchaser for use (hereinafter 'Buyer') that nickel-cadmium and nickel-metal hydride batteries supplied by Seller shall be free from defects in material and workmanship, and shall conform to its published specifications for a period of twelve (12) months from the date of purchase. Equipment covered under Paragraph B.3 and B.4. To be eligible for no-charge labor, service must be performed at a M/A-COM factory, by an Authorized Service Center (ASC) or other Servicer approved for these purposes either at its place of business during normal business hours, for mobile or personal equipment, or at the Buyer’s location, for. M/A-COM Wireless Systems 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 1-434-385-2400) Toll Free 1-800-528-7711 www.macom-wireless.com Printed in U.S.A.