Honda Pressure Washer Manual 2800 Psi
The Ryobi 2800-PSI Pressure Washer is a great homeowner grade pressure washer that can. When operated and maintained according to the instructions in this manual, your Troy-Bilt. This pressure washer operates at a maximum of 2,800 PSI. Black Max Honda Engine Gas Pressure Washer is ideal for. Gas Pressure Washer: 2,800-PSI 2.3-GPM Honda Power. The high pressure hose in the manual.
Ryobi Cleaning Power The Ryobi 2800-PSI Pressure Washer is a great homeowner grade pressure washer that can tackle most cleaning situations. Powered by a Honda GCV160 gasoline engine, you get 2800-PSI of force to clean driveways, decks, windows, and other areas around the house. We have talked about PSI and GPM in other videos, but in general, PSI gives you cleaning power and GPM gives you cleaning speed. The vertical shaft motor and pump allow the upright frame to be moved around without bending over. Integrated into the wand, a power control gauge rotates to allow the user to quickly adjust pressure at the wand tip.
Like other pressure washers with quick attach nozzles, Ryobi equipped this unit with on-board accessory storage. The Ryobi 2800-PSI Gas Pressure Washer has a 3-year limited warranty.
Ryobi RY802800 Features. 2800-PSI; 2.3-GPM. Powerful Honda GCV160 engine. Power control gauge rotates for convenient, adjustable pressure. On-board detergent tank for hassle-free cleaning. On-board accessory storage for user convenience.
3-year limited warranty PSI & GPM If you are looking for a pressure washer, it is good to keep in mind that the PSI of the unit is what does the actual cleaning. Approximately 3,000 PSI is about the cutoff from homeowner grade to low end commercial.
But GPM also have a lot do to with the equation. The more GPM there is, the faster your surface will be cleaned. If you were to spill some soap on a driveway, would a cup of water or a five gallon bucket of water wash it away faster? This unit has a lower GPM, and that is what keeps it powered at homeowner grade.
Starting and Use Ryobi has made this unit very simple to start and use. Even if you don’t read the manual before you put the pressure washer into service (Tip of the Day: Always read your manuals first) there are several guides on the unit itself that tell you what you need to know. To start the unit from a cold start, you will need to pull out the choke, turn the gas supply on and then pull the starting cord. The unit should start within the first three pulls. I was able to accomplish this feat easily without using my dominate hand.
These directions are of course laid out extremely well right on unit right where you will need it. The four nozzles that come with this unit are stored on board for easy access along with the wand and wand hose. When using this unit, make sure you have water flowing to the pump before you start the engine. If you don’t have that water flow, you can wreck the pump. Since the vertical shaft pump that is supplied with this unit is basically unserviceable, you would need to replace the pump entirely to repair the damage.
The nice thing about this type of pump for homeowners is there is no required maintenance. As long as you are mindful of keeping water flow to the pump, it should last you quite a few years. Final Thoughts I have had a unit similar to this Ryobi pressure washer in the past and they have worked great. The Honda GCV160 engine starts and runs well and continues to run well for years. The 2800 PSI and 2.3 GPM are more than adequate for nearly all homeowners needs. In my opinion, this unit is much nicer than the electric models on the market. In order to step up to a larger motor unit that has horizontal shaft and a pump where you can change oil, you will need to spend nearly double what you will on the Ryobi Pressure Washer.
Honda Pressure Washer Parts
I’ve had mine about a year. Today I had a hard time starting it. After a couple pulls it kicked on. About 2mins in to washing car I noticed it was struggling and pressure dropped. I stopped and checked the oil it was a little low and I had plenty of water pressure from the hose.
Started it up 1st pull and it sounded goodfor about 5seconds. It started jumping around and trying to die so i ran over to kill it. Right when I got to it the pump blew out a silver dollar size chunk out of the back aluminum casing and cut me. Then it died.
After looking at it the 3 bolts holding the pump and motor together were almost back out all the way. I live right in the middle of Oklahoma no salt water around so they can’t blame that.
Overall Score 3.8 Pressure Washers With summer upon us, I got my hands on the Ryobi 2800 PSI Pressure Washer featuring a Honda GCV160 engine. The work on my plate was mainly light- to medium-duty, so 2800 PSI was enough power for what I was looking for. While not all Pros really consider Ryobi when looking for a pressure washer, it’s the Honda engine that gives me the confidence to pull the trigger.
I got together with Walt Benner, a career painter with talent and work that frequently extends beyond just painting to tackle a handful of tasks from homeowner needs to property maintenance. But before we even jump too far into this, let’s put the Ryobi RY802800 in its proper place. Where the Ryobi RY802800 Fits 2800 PSI is not the peak when it comes to gas performance on a pressure washer.
Pro commercial models can reach well over 4000 PSI. But it’s not only PSI you need to look.
There’s also how much water it delivers. Ryobi handles up to 2.3 gallons per minute (GPM), but Pro commercial models can push 4 GPM and even higher. SUPPORT OUR ADVERTISERS. So this Ryobi 2800 PSI pressure washer fits in the middle to upper end of medium-duty pressure washers. It’s going to be a solid performance level for cleaning patio furniture, siding, vehicles, and boats. You’ll also be able to handle cement surfaces like driveways and sidewalks. Getting away from some of the light-duty work, you can tackle wood applications like decking and fencing that sub-2000 PSI models struggle with.
Where you lose out in this category is in paint prep on building exteriors – something Pro painters like Walt has to keep in consideration. Ryobi 2800 PSI Pressure Washer Key Features Honda Engine The Honda GCV160 engine is a key point of consideration for the Ryobi RY802800. Apart from the reliable reputation that Honda brings to OPE, the GCV160 is a 4-cycle engine, so you don’t need to mix the gas and oil. Just be sure to check your oil level before each use. It takes SAE 30 or SAE 10W30 oil that is readily available anywhere you shop for auto parts. The engine puts out 161 cc to produce that 2800 PSI pressure. When it comes to fuel, avoid using e85 fuel, though you can use standard 10% ethanol gasoline.
If you’re like me and have an ethanol-free fuel station nearby, paying the higher price for gas might extend the life of the engine, but it’s not a guarantee. Pro Tip: Regularly use a pump protector to reduce hard water deposits and keep your seals and pistons lubricated. If at no other time, add it before winter storage.
A fuel stabilizer is also a good idea before storage in the winter or if you’re using the pressure washer infrequently. The motor can heat the water to a dangerous level, so there’s a release valve that will automatically reduce the pressure if it gets too high.
Axial Pump Most pressure washers come with either an axial or triplex pump. Axial pumps are simpler, but triplex pumps tend to be more efficient and last longer. You’ll find triplex on most commercial level pressure washers because of that.
Pros and property owners that use their pressure washer frequently will want to take note of the axial pump when considering this model. If you’re only going to use your pressure washer a couple times a month or less, the axial pump you find isn’t a concern. On-Board Detergent Tank The detergent tank automatically mixes at a 20:1 ratio with water in a downstream fashion.
According to the manual, you can convert it to an upstream mix, but you’ll need to contact customer service for more information on that. There is a stern warning to only use detergents that carry a pressure washer specific rating. There’s also a specific note not to use bleach – a favorite chemical of many Pros. On-Board Accessory Storage You’ll find that all your accessories have a home on board the pressure washer. Nozzles attach to the front.
Behind those, you’ll find a handy guide for nozzle selection if you’re new to pressure washing. Ryobi includes four nozzles – 0, 25, and 40 degrees along with a soap nozzle. The 25′ hose gets wrapped up and stored using a hook and loop strap. I don’t have a ton of confidence in the long term use of this, so I may task a bungee cord to the job in the near future.
Excell 2600 Honda Pressure Washer Manual
At least in these initial weeks of use, it’s still holding well, though. The lance holder is another issue when it comes to storage. It holds the lance in place, but the plastic is weak enough that it often slips while I’m rolling over bumps.
While it’s not a storage concern, there is a foam grip around the handle. It’s nice on my hands, but I don’t expect it to last beyond a couple of summers in the Florida sun. Controls and Connections There aren’t any surprises when it comes to connections on this model. The source hose and high-pressure hose have standard connections that are simple to find and easy to use. To start the pressure washer, flip the fuel valve to “Open”, the on/off switch to “On”, and the choke to the “Start” position. Give the pull cord a quick yank, and you’re off to the races.
So far, the Ryobi 2800 PSI Pressure Washer has started every time on the first or second pull – but you should expect that with any new unit. Pro Tip: Prime the water pump before starting the motor by running water from the source hose through the high-pressure hose with the lance trigger pulled until water starts coming out. Be sure the source valve is fully open. To adjust the water pressure, there’s a power control gauge on the lance that rotates around easily to dial in the pressure you want. Ryobi 2800 PSI Pressure Washer Performance Most of the work Walt and I had to do has been exterior building and cement cleaning. These jobs are pretty easy for this model and 2800 PSI is more than enough to handle the concrete. Where the extra power comes into play is on the building.
Rather than working from a ladder to get the top portions, we were able to tackle everything from ground level. That would have been a much tougher task for a lower powered unit. Walt has a commercial level pressure washer that he uses for paint prep and some of the bigger cleaning jobs he is contracted to do. But where the attraction of the Ryobi RY802800 comes in for even his Pro perspective is in its lightweight portability. Lightweight is relative, of course, since the unit still weighs 62 pounds.
But either one of us can manhandle it in or out of a truck with relative ease. Like a 12V drill, if the lighter, easier to use model still gets the job done effectively and efficiently, why grab the heavier one? It’s a valid question and one that is answered simply by the number of times Walt grabs this model for smaller jobs. SUPPORT OUR ADVERTISERS. The Bottom Line This Ryobi 2800 PSI Pressure Washer is ideal for any homeowner or property owner that’s looking to keep concrete and wood surfaces clean along with building exteriors and vehicles. But it doesn’t stop there. The reliability of the Honda engine makes this a legitimate supplementary pressure washer for Pros on smaller jobs and punch list work.
Where Pros might need to find a workaround is with the lance and hose storage. The axial pump is the bigger concern unless you’re only turning to it occasionally. Aside from that, the compact, lightweight frame of this unit makes it an awfully attractive option for light- to medium-duty applications.
The price comes in at $329 at your local Home Depot. That puts it in the same price range as models from Briggs & Stratton, Simpson, Generac, and (Northern Tool). There are also a few options that target a lower price point but come with a lower-quality engine.
If you really need to hit that 3000 PSI number, Ryobi has another model that makes the jump for an extra $20. Ryobi 2800 PSI Pressure Washer Key Features.
2800-PSI; 2.3-GPM. Powerful Honda GCV160 engine. Power control gauge rotates for convenient, adjustable pressure. On-board detergent tank for hassle-free cleaning.
On-board accessory storage for user convenience Ryobi 2800 PSI Pressure Washer Specifications. Model: Ryobi RY802800. Engine: Honda GCV160 Engine. Fuel Capacity: 0.25 gallon. PSI: 2800. GPM: 2.3. Pump: Axial Cam.
Hose Length: 25′. Weight: 62 lbs. Includes: 25 ft. High-pressure hose, trigger handle holder, spray wand, 4 quick-connect nozzles (0., 25., 40. & soap), operator’s manual, quick reference guide. Warranty: 3 years limited.
Price: $329.