Mercury Power Trim Manual
- Choose power lifts and outboard power trim and tilt units from Cabela's that are compact, lightweight and easy to use.
- Includes the use of mechanics' common hand tools and the special Mercury Marine. B - Power Trim. Mercury/Quicksilver Lubricants and Sealants.
Oct 13, 2017 - The manual release is all the way tight and appears to be in good. I have a 73 mercury motor w/hydraulic tilt and trim. It has been siiting for a.
50 Mercury Power Trim Manual
GUYS, I asked a question about removing a brokem manual relief screw a few days ago. I have 87 merc 150. The tilt/trim relief screw broke and have to remove it. The hole that allows access to the screw will not allow me to pull screw through it. I was told there was a e-clip on the screw but there is a big plastic looking washer that looks to be permanently attached to screw in the front around the head area of the screw. This prevents me from pulling screw thru the access hole. Its almost the same size as the access hole.
I was thinking of maybe getting a rotary grinder and opening it up just a little bit to remove screw. Any suggestions here or should i do this. Thanks for help.
Re: Need To Remove Tilt/trim Manual Relief Screw thanks wilson. For a minute there i thought i was alone.
My problem is i cant remove the screw. When it broke half stayed in and the other half is just hanging. The front part of screw the one with the slot in it cant be removed. There is a big plastic washer on the screw the exact size of opening in the tilt/trim bracket. This prevents me from even getting to the broke part in the pump. I need to remove the front part of screw before i can get to broke part in the pump. Any suggestions.
Re: Need To Remove Tilt/trim Manual Relief Screw Sorry, but to have enough room to work on that relief valve your going to have remove the trim unit. I had to drill a hole in the center of mine (plastic p.o.s!) to relieve pressure on system to be able to lift the motor. Then I screwed a 3' deck screw into the hole. My relief must not have been loosened in 17 yrs. In broke off inside -3 times.! It has 2 or 3 o-rings on it, its in there snugly!
Mercury Power Trim Manual Release
If you resort to this, drill carefully! I had a new relief on hand to work off/reference of to avoid drilling to deeply.
We Gladly Accept ©Copyright. Sterndrive Engineering Inc. All Rights Reserved. The three year fault-free warranty covers any damage to the drive that requires it to be repaired or replaced including failures resulting from lack of oil, fishing line, impact, neglect, and other abuse. Sterndrive Engineering, Inc. (SEI) manufactures a stern drive designed to replace Mercury Marine's MerCruiser®, Alpha One®, R, MR, Gen II and Bravo One® stern drives. MerCruiser®, Alpha One®, Gen II, R, MR and Bravo One® are trademarks of the Brunswick Corporation.
SEI has no affiliation with the Brunswick Corporation. Consequently, any warranties governing products manufactured and/or sold by Brunswick Corporation will not apply to products manufactured and/or sold by SEI, or to products damaged due to the operation of an SEI product. Sterndrive Engineering, Inc. Is not affiliated with Mercury®; Yamaha®; OMC® or their products.
All reference to their trademarks and trade names are the property of the respective owners. For more information please see our website's.